Regarding rejection of articles

1.6K Views
0 Replies
1 min read
Hello,

"

Two of my articles titled,

1. Computer Q&A for K12 (+2) - Part II
URL : http://www.boddunan.com/computers-a-technology/35-Software/10471-kanipori-nooru-what-is-computers-part-iii.html

2. Kanipori Nooru - What is Computers? - Part III
URL : http://www.boddunan.com/computers-a-technology/35-Software/9772-computer-qaa-for-k12-2-part-ii.html

were rejected and remarked as copied content.

Both these articles are written by me and I have never published these two anywhere. If you say it is a copied content I need the reference regarding, the book or website where you have find this article and on what grounds you have rejected it. Please reply back at the earliest.

"

I had sent this mail several times along with the URLs. But you have neither re-published the article nor you have given me a suitable reply. Such a abnormal delay in a social site is not tolerable.

I need immediate re-publication of the article or immediate reply with reference of where you have found the content either in hard copy or in soft copy.

It is not fair to simply reject original articles without assigning proper reasons.

Regards
Guru S Shivaa
User Name : iamthebaas

11 Replies

Mr. Maverick!

Please clarify and comment on this.I think it needs your attention and intervention.
I think you can put this question in query post in general discussion section.
Guru,

Please send this query to support team and they will resolve it as soon as possible. If it does not resolve in 2 days please send me PM using PM button just below my avatar and I will approve them.
@Shivaa,

This happened to me also when I was a fresh member. Posted it on the forum too....
I hope you write articles in your personal system, and while uploading, select the total content, and then "Copy Paste" it in the articles section to submit.
If you do this, the article definitely gets rejected.

There is "Paste from MSWord" button in the editor. This have to be used to copy from Word.

All the best.
thanx Deepti for tellin that Msword thing.I got few rejected ones.
Thanks for all for giving a positive feed back regarding my topic on rejection of articles.

My articles have been approved and published.

Special thanks to deepti for sharing a very useful information, not only for me but for every other member

Thanks a lot

Guru S Shivaa
some times this same you had published in your blogs
There is "Paste from MSWord" button in the editor.
Again I am facing the trouble of time delay in publishing rejected articles.

I have corrected the article and re-submitted and sent several reminders, but for more than a week my article stand unpublished.

Kindly this time delay has to be reduced must.

Moreover I am publishing an article in a tutorial form in parts, so because of the back log in the previous articles I am not able to post the next parts of the article, which I feel might create an distortion for the reader, while seeking for the predecessor.

And also we have no indication as to whether the article has been reviewed and rejected again or it has not yet been reviewed.

For each review there must be some numbering system or coloring system so that the members can understand whether the article has been reviewed and rejected again or not yet reviewed.


the urls of the latest unpublished articles are
http://www.boddunan.com/computers-a-technology/5-Software/12902-computer-qaa-for-k12-2-part-iv.html
http://www.boddunan.com/computers-a-technology/35-Software/12904-computer-qaa-for-k12-2-part-vi.html

Regards
Guru S Shivaa

Topic Author

G

Guru S Shivaa

@iamthebaas

Topic Stats

Created Wednesday, 31 March 2010 18:52
Last Updated Tuesday, 30 November -0001 00:00
Replies 0
Views 1.6K
Likes 0

Share This Topic