blank space at the top and bottom

This is about space before first line and after last line. There should no blank line before the first line. also there should be no blank line after the last line. You may remove blank line by using 'Delete' key on key board of your computer. .

gulshanji, I have removed the blank space. But after removing the blank space also, at the starting and ending one line space is being remained. So can you please tell me what to do, how to solve this problem?

my article was rejected by an editor giving a comment that I have used wrong font size but I am confused as there is no such rule saying which font size we have to use moreover I can't find an icon above toggle box to change font size any how I have change font size to 10 and resubmitted it lets see what happens. Anyone if knows it please help. :)

gulshanji, I have removed the blank space. But after removing the blank space also, at the starting and ending one line space is being remained. So can you please tell me what to do, how to solve this problem?

You might have removed space in notepad before copying in Boddunan editor. Even then blank space remains in Boddunan. So you should remove the blank lines before the first and after the last in Boddunan editor itself. This you can do by using Del key on computer.

Just see the place the arrow mark has been marked. So can you please tell me how to delete the blank line at the starting of the article.

How to remove blank space at the top of the article. Please solve my problem. due to this reason my articles are getting rejected.

How to remove blank space at the top of the article. Please solve my problem. due to this reason my articles are getting rejected.

Why don't write articles directly in the toggle box?.

go to the start of your article and press "backspace button" that will delete what ever blank space you had left in the start of your article. Press "delete button" at the end of your article that will delete blank space if there at the end of your article that's what I do. :)

How to remove blank space at the top of the article. Please solve my problem. due to this reason my articles are getting rejected.

I have not seen any article rejected for this reason but of course I have seen remarks on almost every one. The way to remove is to go to full screen mode and there you can by placing your cursor on first word know the gap and reduce it. Also the gap in between the paragraphs and lines is important.

my article was rejected by an editor giving a comment that I have used wrong font size but I am confused as there is no such rule saying which font size we have to use moreover I can't find an icon above toggle box to change font size any how I have change font size to 10 and resubmitted it lets see what happens. Anyone if knows it please help. :)

You do not have to use any particular font size any more but the default font. You can use headings like heading 2-3 -4 or bold according to need.

How to remove blank space at the top of the article. Please solve my problem. due to this reason my articles are getting rejected.

Press delete key on the blank space above the first line in Boddunan editor. similarly press delete key after last word in the last line. But I don't think that articles should be rejected for this reason only.

my article was rejected by an editor giving a comment that I have used wrong font size but I am confused as there is no such rule saying which font size we have to use moreover I can't find an icon above toggle box to change font size any how I have change font size to 10 and resubmitted it lets see what happens. Anyone if knows it please help. :)

You do not have to use any particular font size any more but the default font. You can use headings like heading 2-3 -4 or bold according to need.

So was it due to the font size i used on the headings? :blink:

What is the default font size 9 or 10?. :blink:

Just make sure no space before the start letter of the article and also at the end of the article. One space will be converted to one blank line after you submit. The same applies to the paragraphs. I see few members leave one or two spaces before each paragraph for formatting like in MS Word, but that will be converted to blank lines.

I suggest you to write the article directly on editor. Also please edit and check the article once again immediately after you submit the article. You can find and remove any anomaly with this.

my article was rejected by an editor giving a comment that I have used wrong font size but I am confused as there is no such rule saying which font size we have to use moreover I can't find an icon above toggle box to change font size any how I have change font size to 10 and resubmitted it lets see what happens. Anyone if knows it please help. :)

You do not have to use any particular font size any more but the default font. You can use headings like heading 2-3 -4 or bold according to need.

So was it due to the font size i used on the headings? :blink:

What is the default font size 9 or 10?. :blink:

You do not have to worry about default size neither you have to change any fonts. Leave it as it is only headings are your concern.

I resubmitted it today again let's see what happens. :)

I think I changed font size of the headings now I have selected same font size for all content. :)

I resubmitted it today again let's see what happens. :)

I think I changed font size of the headings now I have selected same font size for all content. :)

Okay let's see what happens, by the way why don't you check now? stop leaving big gaps on either sides.

Now we can't preview our submitted articles as before. i don't know why it's taking so much time for restoring that old feature. If so, many such mistakes can be corrected, including formatting errors

Now we can't preview our submitted articles as before. i don't know why it's taking so much time for restoring that old feature. If so, many such mistakes can be corrected, including formatting errors

I think this feature has been implemented to keep poking members away, nice job admin. Thanks. :laugh: :laugh:

Now we can't preview our submitted articles as before. i don't know why it's taking so much time for restoring that old feature. If so, many such mistakes can be corrected, including formatting errors

I think this feature has been implemented to keep poking members away, nice job admin. Thanks. :laugh: :laugh:

Poking members? :blink:
Can't understand. How?

Now we can't preview our submitted articles as before. i don't know why it's taking so much time for restoring that old feature. If so, many such mistakes can be corrected, including formatting errors

I think this feature has been implemented to keep poking members away, nice job admin. Thanks. :laugh: :laugh:

Poking members? :blink:
Can't understand. How?

Why do you want to understand every thing, let the poking members come and ask. I think you are not the one. :laugh: You still have the option to go thr your dashboard.

Sunilji, what is the meaning of poking member, can you please explain. I never heard this word